Administration (continued)
Downloading software updates
You can download software updates for your DVR from a USB memory stick.
Requirement:
●
USB memory stick with latest software release
Step
Action
1
Insert USB memory stick in the USB port.
2
Start update.
Install new release.
Hide camera display
You can suppress the visible display of the video images and camera data.
Step
Action
1
Setting "concealed" mode for the camera.
2
Confirm input.
Restoring factory defaults
Before restoring the factory defaults, you should export your current system settings in case you need to re-
import them later. (see Saving your system setup and Loading your system setup)
Step
Action
1
Shut down the system.
2
Disconnect the mains plug.
Push a paper clip into the Reset button (on the rear of the DVR) and hold it there.
4
Plug in the mains plug.
5
Wait until all 3 LEDs are flashing.
6
Withdraw the paper clip.
DLR1.1-04/xxxV
Menu path
Setup menu > System > System Information >
Change > Upgrade...
Go
Menu path
Setup menu > Device > Camera > Setup
OK
19