Avermedia AVerDiGi EH5108 LITE User Manual page 92

Name
(4) Playback Control
Buttons
(5) Archive
(6) Status bar
(7) Camera ID
(8) Language
(9) Adv. Function
(10) Export
(11) Segment
(12) Full screen
(13) Visual Search
(14) Find Next
(15) Event Search
Function
Begin: Move at the beginning of the recorded video file.
Previous: Go back to the previous frame by frame.
Slower: Play the recorded video file at the speed of 1/2x, 1/4x, 1/8x, or 1/16x.
Rewind: Wind back the recorded video file.
Pause: Briefly stop playing the recorded video file.
Play: Play the recorded video file.
Faster: Play the recorded video file at the speed of 2x, 4x, 8x, or 16x
Next: Go to the next frame by frame.
End: Go to the end of the recorded video file.
To select the video file source for playing.
- DVR Recorded File (HD): To playback the recorded video from the hard disk which
was recording video on the DVR system. (see also
- Backup File(.dvr): The file is backup and save in *.dvr file format. (see also
4.3.3)
- Backup File(.avf): The file is backup and save in *.avf file format. (EH/EXR series
doesn't support *.avf file format when backup).
Display the recorded date, time and play speed.
Show the number of cameras that are being viewed. When you are in single screen
mode, click the camera ID number to switch and view other camera.
To switch DVR application UI language.
Advanced function is including :
HDD Backup: to call out HDD Backup application. (see also
iEnhance: to call out iEnhance application. ( see also
AVF to AVI: Convert the *avf file to *.avi file(EH/EXR series doesn't support this
function)
Export includes Snapshot, Print, and Output Video Clip function.
Snapshot: Capture and save the screen shot either in *.jpg or *.bmp format.
Print: Print the screen shot.
Output Video Clip: Save the segmented file in *.avi, *.mpeg, or *.dvr format
Keep a portion of the recorded video (see also
Use the entire area of the screen to only display the video. To return, press the right
button of the mouse or ESC on the keyboard.
When you switch to full screen in multiple-screen mode, Left click to toggle to only display
one of the video in the multiple-screen mode or all.
Search from a specific camera by Date, Hour, Minute, 10 Seconds and Second(see also
Chapter 4.3.5).
Search for the next event. You can use this when you are using Event Search function.
Search from the recorded activities that were recorded in event log (i.e., Sensor, Motion,
Video Loss). (see also
Chapter
Chapter 4.3.6)
84
Chapter 4.3.2)
Chapter 4.3.4)
Chapter 6)
4.3.1)
Chapter