Avermedia AVerDiGi EH5108 LITE User Manual page 118

- Relay Output
Set to enable/disable the relay operation when the alarm is activated
and to extend additional time in second before it stops the relay
operation.
1. Beside the Relay Output check box, click Detail.
2. In the Alarm Relay dialog box, select from the available relay list
and in the ON column, set to enable/disable the relay operation
when the alarm is activated.
3. In the Retrieve time check box, you may enable/disable to extend
the relay operation time and set the duration in second.
4. Click OK to exit and accept the setting and Cancel to exit without
saving the setting.
- Send E-mail
Send an electronic text message. Beside the Send Email check box, click Detail.
In the E-mail Setting dialog box, click OK to exit and
save the setting and Cancel to exit without saving
the setting.

Mail Server
Enter the SMTP Server and port. If your e-mail
system requires user identification, enable
Authentication check box and enter ID and
Password.

Mail
Fill the mailing information.

From: Enter the sender e-mail address.

To and CC: Enter the recipient email
address and separate it with comma or a
semicolon (;).

Subject: Enter the message title.

Message: Type the message.
110