User Guideline; Start The Machine; Turn Off The Machine; Normal Recording - Q-See QSNDVR4R Manual

5.
Close the top cover of the drawer
drive drawer back into the DVR. (Make sure the
cables are firmly pressed onto the HDD interface

1.Start the Machine

Before starting the machine, please make sure all the items in the "Security Notice" at
the beginning of this manual are fulfilled.
Before starting the machine, please check the system connection, input and output
equipment connection.
Please insure the video-recorder's input video (NTSC/PAL) and the monitor (NTSC/PAL)
meet the demands.
Start exterior equipment after checking over.
Insert the removable hard disk case to the end, and lock it up (turn right the hard disk
lock); connect the power, the machine start to work.

2.Turn off the Machine

Normally turn off the machine when the system shutdown, which means do not to turn
off the machine while playing or system setting up, especially not to turn off the machine
while recording
Push recording button to stop recording or push playing button to stop playing or exit
from system setup menu, then turn off the power.
If do not use the video recorder for a long time, should pull out the power line from the
electrical outlet.

3.Normal Recording

Connect the power to all related equipments; ensure that there is video input.
Push display button to check spare space of the hard disk, if there is no much space,
please think whether to change hard disk first or select overwriting modes.
4 Channel Digital Video Recorder
6.
and
put the hard Lock the hard drive draw by turning the key
clockwise.
)
U s e r G u i d e l i
U s e r G u i d e l i
25
n e
n e