Mac Set; Alarm Setup - Q-See QSNDVR4R Manual

13. Mac Set

When the cursor moves to Mac Set then push enter button, the Mac Set window will appear,
which is illustrated as below.
If you have more than one DVR in a local area network, you have to set each DVR to have an
exclusive mac address, but remember that you have only one chance to modify the mac address,
once you have changed the mac address, this menu will not appear again. If you want to change
the mac address again, please load the factory set, then you can change the mac address again.

14. Alarm Setup

When the cursor moves to Alarm Set, then push enter button, the alarm setup window will
appear, which is illustrated as below. Push upward or downward button to move the cursor. Push
"+" or "-" to change the value.
ALARM ENABLE: alarm trigger switch, can be set to off, low lever or high lever. If users set
it to off, the DVR will ignore the alarm input.
4 Channel Digital Video Recorder
11