Event Search; Start Stop Search - Q-See QSNDVR4R Manual

modify the time, then push enter button to start play from the time you enter. Push search
button back to Search Play menu.
If the time you enter has no play video, the DVR will automatically play the video most
close to the time you enter.
START: the first time you record, END: the end time of recording, you must enter right
time between start and end. If the HDD has been overwritten, the start time maybe not
correct.

9. Event Search

When the cursor moves to Event Search, then push enter button, the event search window
will appear, which is illustrated as below.
There are four types of event list: MOTION, ALARM, SCH and NETWORK. MOTION
means motion alarm recording, Alarm means sensor alarm recording, SCH means time
recording, NETWORK means network recording.
Push upward and downward button to move the cursor among the event list, push
leftward and rightward button to see previous or next page, push enter button to play the
segment you select. Push search button back to Search Play menu.

10. Start Stop Search

When the cursor moves to Start Stop Search, then push enter button, the Start stop search
window will appear, which is illustrated as below.
4 Channel Digital Video Recorder
29