Protocol Set - Q-See QSNDVR4R Manual

You change a recording schedule during a day (24-hour period) using this option.
0-24 stands for 24 hours of a day, each hour is settable to one of three states: T (time), A
(alarm), - (normal).
(T) This period is time scheduled, in scheduled state (push the schedule button), this period
will record automatically.
(A) This period is alarm scheduled, in scheduled state (push the schedule button), this period
will record automatically when there is an alarm input (include motion and sensor alarm).
(-) This period will not record unless you push the record button.
Push leftward button or rightward button to move the cursor, push "+" or "-" button to change
the value, push enter button to set all the value the same as selected one.
Note: Manual record mode and schedule record mode (including motion detection
record mode, sensor record mode and time schedule record mode) cannot be valid at the
same time. Once users select Schedule record mode, manual record mode will invalid; once
user select manual record mode, schedule record mode will be invalid.

18. Protocol Set

Set right protocol, you can control the DVR by a computer or a keyboard.
When the cursor moves to Protocol Set, then push enter button, the protocol set window will
appear, which is illustrated as below. Push upward or downward button to move the cursor, and
push "+" or "-" to change the value.
4 Channel Digital Video Recorder
14