Others - Planet VGW-402 User Manual

Item
Caller ID Mode
Polarity Reverse before
Caller ID
Dual Tone before Caller
ID
Caller ID present
DTMF Caller ID Start
Digit
DTMF Caller ID Stop
Digit

8.4 Others

Flash time and current drop generation/detection time
4-Port SIP Internet Telephony Gateway
Explanation
Caller ID mode to be used for phone (FSK Bellcore, FSK ETSI,
DTMF)
Start polarity reverse to FXS port before sending the caller ID
Send Dual Tone before caller ID (for FSK ETSI use only)
The timing to send the caller ID
(Before the first ring, after the first ring, after the first short ring)
Specify the DTMF caller ID start digit (default is D, the range is
A to D or #)
Specify the DTMF caller ID start digit (default is C, the range is
A to D or #)
59
VGW-400 Series