Debug Setting - Planet VGW-402 User Manual

3.5 Debug Setting

The VGW-400 series provides the real-time debug to syslog or through telnet interface. It generates the
debug information based on debug level and modules. Since the generating debug will consume
system resources, it is recommended to turn on only when necessary and under Planet FAE's
instruction.
Item
Syslog
Check for Start
anytime
Syslog Start
(YYYY/MM/DD
HH:MM)
Syslog Stop
(YYYY / MM / DD
HH:MM)
Syslog Server
Syslog Port
DSP Debug
DSP Capture
Server
DSP Capture Port
Explanation
Enable or disable to send system information to syslog server or not
Always send syslog or only during a specified time range.
Always send syslog or only during a specified time range.
The syslog stop sending time
Syslog server IP address
Syslog server service port (default is 514)
Enable or disable to send DSP information to capture log
syslog capture server IP address
syslog capture server service port (default is 50000)
4-Port SIP Internet Telephony Gateway
28
VGW-400 Series