Vlan - Draytek Vigor2760 Series User Manual

P o r t - B a s e d V L A N
P o r t - B a s e d V L A N
Relative to tag-based VLAN which groups clients with an identifier, port-based VLAN uses
physical ports (P1 ~ P4) to separate the clients into different VLAN groups.
Go to LAN page and select VLAN. The following page will appear. Click Enable to invoke
VLAN function.
Below is an example page in Vigor2760n:
Note: Settings in this page only apply to LAN ports (not WAN ports).
Available settings are explained as follows:
Item
Enable
LAN
Wireless LAN
Vigor2760 series features a flexible VLAN system. In its simplest form, each of the Gigabit
LAN ports can be isolated from each other, for example to feed different companies or
departments but keeping their local traffic completely separated.
To add or remove a VLAN, please refer to the following example.
1. If, VLAN 0 is consisted of hosts linked to P1 and P2 and VLAN 1 is consisted of hosts
linked to P3 and P4.
Description
Click it to enable VLAN configuration.
P1 – P4 – Check the LAN port(s) to group them under the
selected VLAN.
SSID1 – SSID4 – Check the SSID boxes to group them
under the selected VLAN.
85 Vigor2760 Series User's Guide