Draytek Vigor2760 Series User Manual page 20

Interface
PWR
I / O
Factory Reset
WLAN
ON/OFF/WPS
VDSL/ADSL
USB (1-2)
LAN (1-4)
(or WAN2)
Interface
LINE
Phone1/Phone2
Vigor2760 Series User's Guide
Description
Connector for a power adapter.
Power switch.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
WLAN WPS -
Press this button for 2 seconds to wait for client device making
network connection through WPS. When the LED lights up, the WPS
connection will be on.
WLAN ON/OFF - Press the button once to enable (WLAN LED on) or disable
(WLAN LED off) wireless connection.
RJ-11 connector for accessing the Internet (WAN1)
Connector for USB storage, printer or 3G/4G modem (WAN3)
RJ-45 (Gigabit Ethernet) connectors for local network devices. When
WAN2 is enabled, LAN Port 4 becomes WAN2 (Ethernet) and WAN1
(RJ11) is disabled.
Description
Connector for PSTN life line.
Connector of analog phone for VoIP communication.
10