General Setup - Draytek Vigor2760 Series User Manual

3 . 2 . 2 G e n e r a l S e
3 . 2 . 2 G e n e r a l S e
This page provides you the general settings for LAN. Click LAN to open the LAN settings
page and choose General Setup. Only Vigor 2760, only LAN1 is available.
Available settings are explained as follows:
Item

General Setup

Advanced
t u p
t u p
Description
Allow to configure settings for each subnet respectively.
Index - Display all of the LAN items.
Status- Basically, LAN1 status is enabled in default. On
Vigor 2760, only one LAN subnet is supported.
DHCP- DHCP is enabled by default.
IP Address - Display the IP address for each LAN item.
Details Page - Click it to access into the setting page.
IPv6 – Click it to access into the settings page of IPv6.
DHCP packets can be processed by adding option number
and data information when such function is enabled.
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option
number with data. For example,
77 Vigor2760 Series User's Guide