Draytek Vigor2760 Series User Manual page 53

Physical Mode
Access Mode
Details Page
IPv6
Advanced
It shows the physical connection for
WAN1(ADSL/VDSL2) / WAN2 (Ethernet) /WAN3
(3G/4G USB Modem) according to the real network
connection.
Use the drop down list to choose a proper access mode. The
details page of that mode will be popped up. If not, click
Details Page for accessing the page to configure the
settings.
This button will open different web page (based on IPv4)
according to the access mode that you choose in WAN
interface.
Note that Details Page will be changed slightly based on
ADSL/VDSL2 physical mode specified on
WAN>>General Setup.
This button will open different web page (based on Physical
Mode) to setup IPv6 Internet Access Mode for WAN
interface.
If IPv6 service is active on this WAN interface, the color of
"IPv6" will become green.
This button allows you to configure DHCP client options.
DHCP packets can be processed by adding option number
and data information when such function is enabled and
configured.
Enable/Disable – Enable/Disable the function of DHCP
Option. Each DHCP option is composed by an option
number with data. For example,
Option number:100
Data: abcd
When such function is enabled, the specified values for
DHCP option will be seen in DHCP reply packets.
Interface – Specify the WAN interface(s) that will be
overwritten by such function. WAN4 ~ WAN6 can be
located under WAN>>Multi-PVC.
Option Number – Type a number for such function.
43 Vigor2760 Series User's Guide