Draytek Vigor2760 Series User Manual page 16

Interface
PWR
I / O
Factory Reset
VDSL/ADSL
USB (1-2)
LAN (1-4)
Or WAN2
Vigor2760 Series User's Guide
Description
Connector for power adapter.
Power switch.
Restore the default settings. Usage: Turn on the router (ACT LED is
blinking). Press the hole and keep for more than 5 seconds. When you
see the ACT LED begins to blink rapidly than usual, release the button.
Then the router will restart with the factory default configuration.
RJ11 connector for accessing the Internet.
Connector for USB storage device, printer or 3G/4G modem (WAN3)
RJ-45 Gigabit Ethernet connectors for local network devices. When
WAN2 is enabled, LAN Port 4 becomes WAN2 (Ethernet) and WAN1
(RJ11) is disabled.
6