Draytek Vigor2760 Series User Manual page 81

ATM OoS
Bridge mode
After finished the above settings, click OK to save the settings.
WAN links for Channel 4, 5 and 6 are provided for router-borne application such as TR-069.
The settings must be applied and obtained from your ISP. For your special request, please
contact with your ISP and then click WAN link of Channel 4, 5 and 6 to configure your router.
priority for such VLAN. The range is from 0 to 7.
Such option is available only when WAN1 is connected
with the type of ADSL.
QoS Type - Select a proper QoS type for the channel.
Type the values for PCR, SCR and MBS respectively.
Enable – Click it to enable Bridge mode for such channel.
Physical Members – Group the physical ports by checking
the corresponding check box(es) for applying the bridge
connection.
71 Vigor2760 Series User's Guide