Draytek Vigor2760 Series User Manual page 80

Click any index (7~8) to get the following web page:
Available settings are explained as follows:
Item
Multi-VLAN Channel 7/8
General Settings
Vigor2760 Series User's Guide
Description
Enable – Click it to enable the configuration of this
channel.
Disable –Click it to disable the configuration of this
channel.
VPI - Type in the value provided by your ISP.
VCI - Type in the value provided by your ISP.
Protocol - Select a proper protocol for this channel.
Encapsulation - Choose a proper type for this channel. The
types will be different according to the protocol setting that
you choose.
Add VLAN Header – Check the box to enable the
following two options.
VLAN Tag – Type the value as the VLAN ID number.
Valid settings are in the range from 1 to 4095. The network
traffic flowing on each channel will be identified by the
system via their VLAN Tags. Channels using the same
WAN type may not configure the same VLAN tag value.
Priority – Choose the number to determine the packet
70