Index
Profile
Domain Name
You can set up to 20 LAN DNS profiles.
To create a LAN DNS profile:
1.
Click any index, say Index No. 1.
2.
The detailed settings with index 1 are shown below.
Available settings are explained as follows:
Item
Enable
Profile
Domain Name
IP Address List
Click the number below Index to access into the setting
page.
Display the name of the LAN DNS profile.
Display the domain name of the LAN DNS profile.
Description
Check this box to enable such profile.
Type a name for such profile.
Type the domain name for such profile.
The IP address listed here will be used for mapping with the
domain name specified above. In general, one domain name
maps with one IP address. If required, you can configure
two IP addresses mapping with the same domain name.
Add – Click it to open a dialog to type the host's IP
address.
177
Vigor2760 Series User's Guide