Normal Operation; Radio Transmitter; Intercom Pushbutton - Centsys D3 User Manual

Normal operation

Normal operation
The gates can be opened or closed in the following way:

Radio transmitter

A handheld radio transmitter, carried in the motor car, sends a coded signal to the
receiver mounted in the control enclosure to open or close the gate.
Press once for approximately one second to initiate gate motion.
If the transmitter is pressed while the gate is either opening or closing the gate will
immediately stop. Pressing the button again will cause the gate to reverse.
If the automatic closing feature (see Controller Features and Functions) has been
selected and the gate is closing automatically when the transmitter is pressed, the
gate will stop and stay in that position. Pressing the button again will cause the gate to
re-open. If the gate is opening with the automatic closing facility selected, and the
transmitter is then pressed, the gate will stop. The gate will close automatically after
the Autoclose delay time.

Intercom pushbutton

Visitor outside gate requests entrance. Gate opened from intercom
pushbutton inside house.
Page 8
PRESS TO
OPEN GATE