Manual Release - Centsys D3 User Manual

the "Autoclose" facility described earlier can be enabled.
The gate will now remain in the open position until either the "Autoclose" facility has
timed out, or a vehicle has driven through the entrance, in which case the gate will
start to close immediately the vehicle has passed.
All operators are fitted with a manual release mechanism. This is to allow the gate to
be operated in the event of a total malfunction of the equipment. It is also required if
the mains power has failed in the case of the A10 (without DC converter) operator.
CENTSYS D3 and D5
Open manual override
CENTSYS A10

Manual release

handle in closed position.
Rotate thumbwheel clockwise
until gate is free to move
Open lock cover and insert key.
Turn key ¼ turn counter
clockwise to unlock.
Page 19
Manual release Manual release
Pull manual release handle
down to disengage manual
release