Battery; Gearbox Oil Level; Power Supply - Centsys D3 User Manual

The battery (D3/D5 Operators only)
CENTSYS systems that are fitted with maintenance-free lead-acid batteries, should
provide at least three years of normal service life.
For sites utilizing an external 35Ah battery, ensure that the level of liquid (electrolyte
level) is correct. Check for corrosion of the battery terminals. Clean and apply copper
based grease as necessary.
WARNING

Gearbox oil level

Check the oil level as described in the section, Lubrication, of the Installation Manual.
Should the installation manual be unavailable, please refer to the Online Manuals on
our website, www.centsys.com.au. Alternatively, please contact your CENTSYS
installer.

Power Supply

All Centurion Systems (Pty) Ltd operators have power supplies separate to the
controllers. In the case of product malfunction, the power supply fuses should be
checked.
NOTE: D5/D3 OPERATOR PCB SHOWN
Ensure that the enclosure which houses the 35Ah
battery can adequately vent any battery gases
generated.
GREEN LED
CHARGE/POWER
Red LED indicate
the mains supply
is switched on.
Page 21
Depress and
twist to remove
fuse holder