Centsys D3 User Manual page 2

Product Guarantee D3 and D5 Product Guarantee D3 and D5
The CENTSYS D3 and D5 Version 3 sliding gate operators are manufactured with extreme care,
thoroughly inspected and tested. The operators are only guaranteed against faulty materials or
workmanship for a period of 24 months from the invoice date of the operator, or 26 months from the
manufacturing date (as shown on the serial number label of the operator), whichever expires first.
The guarantee will cover the repair or replacement at our discretion of such faulty materials or parts
free of charge, provided that the equipment is returned to our workshop.
The guarantee only applies to the gearbox, motor, controller and other components specific to the
operator. Peripheral components such as the charger, battery and other ancillary devices connected
to the operator carry the guarantee provided for these components.
This guarantee will not apply to any operator which:
a. Has been subject to misuse or which has been used for any purpose other than
designed for by Centurion Systems (Pty) Ltd
b. Has not been installed in accordance with the installation instructions provided.
c. Has damage caused as a result of handling during transit, atmospheric conditions,
insect infestation, power surges or other forces outside of our control
d. Has been repaired by any workshop and/or person NOT previously authorised by
Centurion Systems (Pty) Ltd
e. Has been repaired with components not previously tested, passed or authorised by
Centurion Systems (Pty) Ltd
Product Guarantee A10 Product Guarantee A10
All CENTSYS products are manufactured with extreme care, thoroughly inspected and tested. The
products are only guaranteed against faulty materials or workmanship for a period of 12 months
from the invoice date of the product, or 14 months from the manufacturing date (as shown on the
serial number label of the operator), whichever expires first.
The guarantee will cover the repair or replacement at our discretion of such faulty materials or parts
free of charge provided that the equipment is returned to our workshop.
This guarantee will not apply to any equipment which:
a. Has been subject to misuse or which has been used for any purpose other than
designed for by the manufacturers.
b. Has not been installed in accordance with the installation instructions provided.
c. Has damage caused as a result of handling during transit, atmospheric conditions,
insect infestation, power surges or other forces outside our control.
d. Has been repaired by any workshop and/or person NOT previously authorised by
Centurion Systems (Pty) Ltd
e. Has been repaired with components not previously tested, passed or authorised by
Centurion Systems (Pty) Ltd
Page 2