Troubleshooting - Elan Via! 4.0 Installation Manual

E L A N H O M E S Y S T E M S

Troubleshooting

General
Symptom
Unit will not activate/turn-on
when screen is touched
Unit will activate but no
IR control of sources and/or
multi-room controller
Unit will activate, but displays
"UNPROGRAMMED"
Video
Symptom
No video displayed when
TV or Camera Icon touched
Incorrect camera or video
source displayed
© ELAN Home Systems 2005 • All rights reserved.
INSTALLATION MANUAL
Cause
No power supply connected
Incorrect power supply
Power supply defective
Incorrect power connections
Incorrect IR connections
Incorrect or missing IR/RS232
commands in VIA!TOOLS
Does not contain a VIA!TOOLS
program.
Cause
Video cables not connected
or incorrectly connected
Video In/Out connected
backwards
Video source turned off
Source©s video output(s)
incorretly connected
Incorrect or missing IR/RS232
commands in VIA!TOOLS
Solution
Connect PWR1 or PVIA1
Power Supply
Use PVIA1/PWR1 16VDC
PowerSupply
With a multimeter, test for
16VDC
See p.x-x
See p.x-x
Use talk-back IR emitter or IR
activity LED to verify IR signal
Verify commands in VIA!TOOLS
Download to unit with VIA!TOOLS
setup software.
Solution
Verify video connections
Connect properly
Turn on source
Connect properly
Verify IR commands in VIA!TOOLS
VIA!4.0
Page 35