Elan Hd System - Elan Via! 4.0 Installation Manual

VIA!4.0
INSTALLATION MANUAL
Installation - Connections (cont'd)

ELAN HD System

Use a PVIA Wall Plate and a PHD12 Precision Panel for HD System
when installing VIA!4.0s in an HD system. Connect Status, IR, GND,
and 16VDC from the PVIA Wall Plate to the VIA!4.0 as shown.
Connect Status, IR, and GND between the PVIA Wall Plate and the
PHD12, as shown. Multiple VIA!s will connect in the same way.
Please consult the HD System Installation Manual for additional
details.
Use BOTH Twisted
Pairs For Power
(GR,GR/WH & BR, BR/WH)
ELAN strongly recommends the use of
a PVIA1, PVIA4, or PVIA10 VIA! Wall
Plate and a PHD12 Precision Panel
when installing a VIA!4.0 in an HD
Page 28
ELAN
C45P
PHD12 TELCO/DB2
Punchdown Connector
System.
© ELAN Home Systems 2005 • All rights reserved.
E L A N H O M E S Y S T E M S
White/Brown
Brown
White/Green
Green
White/Orange
Orange
White/Blue
Blue
Standard ELAN RJ-45 Pin-Out
TAB
PVIA1 Rear
+16V
GND
+16V
GND
V485+
V485-
IR
ST/SNS
Z485+
Z485-
PIN # COLOR CODE
1 BLUE
2 WHITE/BLUE
3 ORANGE
4 WHITE/ORANGE
5 GREEN
6 WHITE/GREEN
7 BROWN
8 WHITE/BROWN
CABLE