Cutout Dimensions - Elan Via! 4.0 Installation Manual

E L A N H O M E S Y S T E M S
Installation - Rough-In (cont'd)

Cutout Dimensions

A template is included in the VIA!4.0's box for use when retro-fitting
the unit. Place the template on the wall in the desired location with
the printed words visible before tracing the pattern. Be extremely
careful not to cut AC lines or anything else that may be behind the
wall! Once the pattern is traced, use a dry wall knife or saw to cut a
hole of the correct size and shape.
1"
2"
1"
3/8"
© ELAN Home Systems 2005 • All rights reserved.
INSTALLATION MANUAL
4 5/8"
VIA40 CUT-OUT TEMPLATE
FACE THIS SIDE OUT,
AWAY FROM DRYWALL.
VIA!4.0
4"
Page 21