Mechanical Installation; Positioning The Tumble Dryer - Whirlpool PROW 0612IIM Installation And Maintenance Manual

MECHANICAL INSTALLATION

POSITIONING THE TUMBLE DRYER

The tumble dryer can be installed free-stan-
ding, built-in or stacked on top of a washing
machine. Remember that the dryer generates
heat and should not therefore be placed in a
room that is too small. If the room is very small,
drying will take longer due to the limited volu-
me of air.
TIP!
To improve the air supply, leave open the door
of the room in which the dryer is placed.
WARNING!
Electrical installation must be carried out by a
qualified electrician.
A. Free-standing
The tumble dryer can be placed next to the
washing machine. The dimensions of the tum-
ble dryer are:
TUMBLE DRYER
22
B. Built-in
The tumble dryer can be built in under a work-
top with a minimum height of 850 mm. The
gap must be at least 600 mm wide.
C. Stacked
The tumble dryer can be stacked on top of an
Whirlpool washing machine. Use the stacking
kit that is supplied with the machine:
2 plastic holders. Plastic bag inside the drum.
2 metal tip guards. Attached to the lower back
of the machine.
An optional pull-out top can be purchased
from your Whirlpool dealer: Art no. 80 619 07-
0 (white) and 80 619 07-26 (black).
MECHANICAL INSTALLATION