Child Lock - Whirlpool PROW 0612IIM Installation And Maintenance Manual

Super quick wash
- C, 30, 35, ..., 85, 90, 95ºC.
Delicate and Wool wash - C, 30, 35, 40ºC.
If you choose C, the wash temperature will
be the same as the intake water temperature.
To change the wash temperature, do as follows:
Switch off the power switch,
it on again so that the machine is in start-up
mode.
Press the button five times, then press
P8
the button five times. You have to comple-
P6
te these ten button presses within fifteen se-
conds.
Press the programme button,
select the programme you want to change the
wash temperature for.
Then use buttons
and (increase temperature) to choose the
P7
wash temperature. As you scroll through to the
chosen temperature it appears at the bottom of
the display alongside the
When your chosen wash temperature appears
press the button again to confirm your
P8
choice.
CHILD LOCK ON
Start/Stop
To prevent accidental button pushes on the
button you can activate the child lock
Start/Stop
function. The
Start/Stop
in for three seconds to activate the machine.
To switch the child lock on or off, do as follows:
Switch off the power switch,
it on again so that the machine is in start-up
CHANGING SETTINGS
, then switch
-
P1 P8
(reduce temperature)
P6
symbol.
BUTTON
button then must be held
, then switch
mode.
Press the
the button five times. You have to comple-
P3
te these ten button presses within fifteen se-
conds.
Within three seconds of pressing the
button for the last time you must then press the
or
P6 P7
the child lock on or off.
Press
P7
Press
P6
, to
button five times, then press
P8
button to choose whether you want
to activate the child lock.
to disable the child lock.
WASHING MACHINE
P3
13