4
Legend
Unused numbers are not applicable
4.
timers
5.
bracket
6.
6-contact terminal strip
7.
strain relief
8.
9-contact terminal strip
9.
metric strain relief
10.
high-low control lead
38
Conversion to a different gas category
3. Fit the burner pressure regulator (1) including the sealing gasket from the
conversion set. Attach the burner pressure regulator to the gas control using
the two small screws supplied. (7).
Installing and removing add-on components
7
is
4
5
6
8
9
10
IMD-0130 R1
Instruction manual CHA