Installation; Introduction; Packaging - Lochinvar CHA 100 G CE Installation, Commissioning, User & Maintenance Instructions

Direct gas fired floor standing water heater with automatic pilot ignition
Table of Contents

Advertisement

is
3
3.1

Introduction

3.2

Packaging

Instruction manual CHA

Installation

Warning
The installation must be carried out by an approved installation engineer in
compliance with the general and local regulations imposed by the gas, water
and power supply companies and the fire brigade.
The appliance may only be installed in a room that complies with the
requirements stated in national and local ventilation
regulations
(1.3
"Regulations").
This chapter describes the installation activities to be carried out before the
appliance may be started up
Packaging;
Ambient
conditions;
Technical
specifications;
Vented water
connections;
Vented water
connections;
Gas
connection;
Flue gas
discharge;
Electrical
connection;
Checking the supply pressure and burner
For a possible conversion to a different gas category, see
conversion
(4 "Conversion to a different gas
To avoid damaging the water heater, remove the packaging carefully.
We recommend unpacking the water heater at or near its intended location.
Note
The water heater may only be manoeuvred in an upright position. Take care
that the water heater is not damaged after unpacking.
(9 "Starting the water
heater"), in particular:
pressure.
category").
15

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Cha 100 ce

Table of Contents