Changing The Print Head And Resetting The Ink Status Counter - Rena DA-590 Operation Manual

Changing the
print head and
resetting the ink
status counter
-Remove the print head by tilting it out towards the exit side of the printer.
-Follow the instructions supplied with the new print head.
-When inserting the new print head, make sure that it locks audibly into place.
-Press the "end" key to return to off-line mode. The display is reset to 100%.
-Press the "start" key to return to on-line mode.
Κ
The ink status display applies only to the HP 51626A or its equivalent!
\text\da590\printing
- Press the "start" key to go into off-line mode.
- Press the "prog" key.
- Press the "prev" key to get to the "HEAD RESET" menu.
- Press the "enter" key twice:
The print head will move away from the "park" position.
Press the leaf spring (d) in the direction of the arrow to eject the
print head (13).
4.2
Printing
DA590 Instruction Manual