Viewer Part> Basics; Starting Smart Client - JVC VR-X3200U Instructions Manual

<Viewer Part> Basics

Starting Smart Client

You can view live images and play back recorded images by
using the viewer (Smart Client).
Note:
● To use the Smart Client on a computer other than this
unit, make sure to install the Smart Client in advance.
(A Page 134)
1
Double-click the Smart Client shortcut on the
desktop
The Smart Client login screen appears.
Note:
● If the Smart Client shortcut is not found on the desktop,
select ASmart ClientB from [All Programs] in the [Start]
menu.
2
Specify your login information in the following
fields
Note:
● Each of the default of the user name and password is set
as follows:
User Name: admin
Password: jvc
1
2
3
4
5
6
Item
A
Server address For specifying the IP address and
port number of this unit. (For
example, in the case of [http://
192.168.1.253:80], [:80] is the port
number.)
The port number is the number as
specified in [Advanced
Configuration] under [Server
Access] of the Management
Application. (A Page 109)
B
Authentication For selecting one of the three types
of authentication.
Select [Basic authentication].
Windows Login as the current Windows user.
authentication
(current user)
Windows Login as the Windows user, but a
authentication user name and password (MUST)
will be required.
Note:
● You will use this setting when
Basic A user name and password will be
authentication required to login to this unit.
C
User name For entering the Windows user
name if you have selected
[Windows authentication] for the
[Authentication] in B (A Page 85).
For entering the user name
registered in the [Users]
(A Page 66) of the Management
Application if you have selected
[Basic authentication].
D
Password For entering the login password for
this unit if you have selected
[Windows authentication] for the
[Authentication] in B (A Page 85).
For entering the password
registered in [User Setup]
(A Page 66) of Management
Application if you have selected
[Basic authentication].
E
Remember If you have selected [Windows
password authentication] or [Basic
authentication] for the
[Authentication] in B, select this
check box to login the next time
simply by clicking the [Connect]
button.
F
Auto-login Enables you to login automatically.
Select this check box to
automatically login to the Smart
Client from the next time.
Description
you login as the Windows user
to this unit from an outside
monitoring PC. You need to set
the login password for this unit
(A Page 85).
131