Table of Contents
Advertisement
<Recorder Part> Reference
Cameras and Storage Information
Item
Recording and Archiving Paths
Template
(For each camera)
Dynamic Path Selection – Archives
Dynamic path
selection - All
cameras
98
Recording Path
D:\MediaDatabase
Archiving Path
Retention Time
Day(s), Hour(s),
Minute(s)
Apply Template
Select check box
^
Camera Name
^
Shortcut
Recording Path
D:\MediaDatabase
Archiving Path
Retention Time
Day(s), Hour(s),
Minute(s)
Cameras
Open
Enable dynamic path
Select check box
selection for archives
Do not select check
box
^
Use
^
Drive
^
Path
^
Drive Size
^
Free Space
^
New UNC path
Preset Values
For displaying template settings.
Do not change this setting.
Using dynamic
For specifying the archiving destination of the
path
database.
● You can not specify the destination when a dynamic
path is used.
For saving records to the database until the record
reaches the predefined recording time. Enter the
recording time, then select a unit from the list.
7 Day(s)
For configuring settings for each camera.
Select this check box to apply the template setting.
Do not select
Note:
● Click [Select All] to select check boxes of all
check box
cameras.
● Click [Clear All] to deselect check boxes of all
cameras.
For displaying the camera name.
For specifying the camera number.
● Do not assign a camera number that is used by
other cameras.
Do not change this setting.
Using dynamic
For specifying the archiving destination of the
path
database.
● You can not specify the destination when a dynamic
path is used.
For saving records to the database until the record
reaches the predefined recording time. Specify the
recording time in the next field and select the unit of
7 Day(s)
time (Day(s), Hour(s), Minute(s)) from the list.
For displaying the [Camera Properties] window.
Select this check box to automatically select an
archiving destination drive from the registered list.
● Default value varies depending on the camera.
The registered archiving destination will be listed along
with the drive, path, capacity and free space.
Deselecting the [Use] check box will disable the
selection.
For specifying a drive path you want to register for
automatic selection by dynamic path.
: Initial value
Description
Advertisement
Table of Contents
