Registering A Slave Nvr - JVC VR-X3200U Instructions Manual

Registering a Slave NVR

Configure settings from the NVR to be used as the master.
1
Click [+] in [Advanced Configuration]
2
Double-click [Master/Slave]
The master/slave setting screen appears.
● Ensure that the [Enable as master server] check box is
selected.
3
Click [Add]
The slave server setting screen appears.
4
Specify the address and port number of the
slave server
5
Click [OK]
The NVR you just configured is registered as a slave.
65