Table of Contents
Advertisement
<Viewer Part> Basics
Viewing Live Images
Showing the Live Window
1
Click the [Live] tab
The live window appears.
1
6
2
Item
A
[Live] tab
B
Operation section
C
Camera images
D
View
E
[Close] button
F
View list
● If you configure camera recording settings without closing
the live window, live images may not be displayed
correctly after you configure the camera recording
settings.
In this case, "Cannot connect to server! Retry" or "Cannot
connect to 127.0.0.1:80 on [device name] (camera name)"
will be displayed in the live screen. (127.0.0.1:80 is an
internal IP address of this unit during operations.)
Note:
● It may take a while to show images from cameras
depending on the network line status.
● It may take several minutes to show the live image display
screen depending upon the number of additional HDD(s)
connected.
140
5
4
3
Description
For displaying the Live
window.
(A Page 141)
Live images from the camera
Segmented display of images
from multiple cameras
For closing the Smart Client.
For switching views.
To check the camera status
Check the status from the 3 color box indicators and the
characters that indicate camera operation status on the blue
bar at the top of the window of each camera.
1 2
Item
A
Camera operation status indications
Live (green)
Recording (red)
Stopped (yellow)
B
Event indicator
(left: yellow)
C
Motion indicator
(center: red)
D
Live indicator
(right indicator:
green)
Note:
● To enlarge the camera window, double-click the upper
blue bar. To restore the original size, double-click the
upper blue bar again.
● Click the active event or motion indicator to turn off the
indicator. You can hide the live indicator in "Display
settings" (A Page 170)
4
3
Description
For indicating that live images
are being displayed without
recording.
For indicating that images are
being recorded.
For indicating that images
cannot be acquired form the
camera or the camera is offline.
Turned on when any event
occurs. If no event is specified
or exists, the indicator remains
in black.
Turned on when any motion is
detected.
Blinking each time it receives
images from the camera.
Advertisement
Table of Contents
