Table of Contents
Advertisement
6
Select [Yes: Disk on port 0] for [Do you want to
keep data from one of selected disk?], then click
[Next]
Caution:
● Keep [Enable volume write-back cache] in the advanced
settings disabled; otherwise, performance of the unit may
drop.
7
Click [Create Volume]
8
Click [▲] on the taskbar at the lower right corner
of the screen, and click [Customize]
[Selection of icon and notice to display on the taskbar]
starts up.
9
Change the setting of [IAStorIcon] to [Display
Icon and Notice]
10
Click [OK]
Using NAS
NAS (Network Attached Storage) is a dedicated file server
that is connected to the LAN1 network.
In the case of NVR, you can specify NAS connected to the
camera network (LAN1) as a drive for archiving data.
Caution:
● When NAS is used, the recording frame rate will decrease
depending on the NAS performance.
Note:
● Follow the NAS [Instruction Manual] for settings on NAS.
This may take a while depending on the format and RAID
settings, etc. For further details, please contact the NAS
manufacturer.
● For details on NAS you can connect to this unit, consult
your nearest JVC KENWOOD dealer. You can also check
on our website.
Connecting to NAS
1
Double-click [4. Unit Setup] on the desktop
The [Unit Setting] window appears.
73
Advertisement
Table of Contents
