Table of Contents
Advertisement
Setting the Date and Time
of This Unit
This section describes procedures to set the date and time of
this unit.
Caution:
● There may be a daily error of 10 to 20 seconds depending
on the operating environment.
● The clock time may vary significantly when the lithium
battery level used for backup in this unit is running low. In
such a case, consult your nearest JVC KENWOOD
dealer.
Using the time server
Use of a time server (NTP server) is recommended to ensure
recording at an accurate time.
Caution:
● Connect the time server to the LAN2 network.
1
Click the [Start] button on the desktop, followed
by clicking [Control Panel]
The control panel opens up.
2
Click [Clock, Language, and Region]
The [Clock, Language, and Region] screen appears.
3
Click [Date and Time] and select [Internet Time]
4
Select [Change settings...]
The [Internet Time Settings] window opens up.
5
Select the [Synchronize with an Internet time
server] check box and select a server
6
Click [OK]
Setting the time manually
If you do not use a time server (NTP server), click [Change
date and time] in [Date and Time] screen in Step 3 in "Using
the time server".
83
Advertisement
Table of Contents
