Switching Views; Manually Recording Images Of A Specific Camera - JVC VR-X3200U Instructions Manual

Hide thumbs Also See for VR-X3200U:
Table of Contents

Advertisement

Operation section on the live screen
In the live image screen, you may use the following
operations in corresponding sections.
● You can select to show/hide each section by clicking an
icon.
Section name
Icon
Views
Cameras
Event
Output
Audio
Sequence
Explorer
PTZ Control

Switching Views

This section describes procedures to switch views and
display images from another camera.
1
Select a view in the [Views] section, or from the
view list on the upper part of the window
Caution:
● Do not switch views frequently in a short time.
● If live images are not displayed in VN-C625U/VN-C655U,
change the password for VN-C625U/VN-C655U
connection set in the camera and this unit. For setup
procedures, refer to the relevant instruction manuals of
cameras used, and the [Password] setup procedures
under [Hardware Devices] in [Advanced Configuration]
described in this manual (A Page 90).
Operation
For selecting a view to
display from the registered
views.
For displaying a camera
list. By selecting a camera
not listed in the view and
drag it into the view, you
can view images from the
camera.
For manually triggering a
preset event.
For performing a preset
output.
For using a microphone or
a speaker connected to the
camera.
For displaying a list of
recorded images.
For performing camera
operations (pan, tilt and
zoom).
Manually Recording
Images of a Specific
Camera
You can record images of a specific camera when you view
live images.
● Access to this feature is limited. For details, please
contact your monitoring system administrator.
● You need to set an upper limit of recording time in the
Management Application in advance. ("Manual
Recording" (A Page 99)
1
Right-click on a camera image you want to
record and select [Start Recording...] from the
shortcut menu
Recording starts and will automatically end after the
specified time.
Note:
● You cannot stop recording while it is in progress.
● You cannot change the recording time from the Smart
Client. For details, please contact your monitoring system
administrator.
141

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vr-x1600u

Table of Contents