10.5.3 Setting the synchronization
Siemens Building Technologies
Fire Safety & Security Products
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
In the Configuration menu, select the menu option Camera and the
2.
Synchronization suboption.
The Synchronization dialog will appear:
Fig. 9
Synchronization settings
Enter the desired settings in this dialog.
3.
Operating mode
VPhase (0 to 300°)
Click Save.
4.
The following options are available:
Prerequisite:
The LL mode is only available for camera models with AC power
supply.
INT
The IP camera is in the internal SYNC mode (quartz).
INT
The IP camera is in line lock mode.
Select a phase angle from 0 to 300° for the LL operating mode. The
default setting is 0°.
NOTE
With DC operation SYNC automatically selects INT mode even if
LL has been set.
Configuration
39
04.2006