Ptz Control - Siemens CCIS1337-LP Configuration Manual

7.5.1

PTZ control

Siemens Building Technologies
Fire Safety & Security Products
The PTZ operating panel enables a pan/tilt drive with SCU protocol to be
controlled.
Click PTZ under the live image. See Section 10.9.1 Displaying live video.
1.
The PTZ control appears.
Fig. 3 PTZ control
Position number
1
The current pan/tilt position is shown here. The position number can be set using the keypad
(9) or with the + / - keys (2).
Select SIMATRIX input
2
The + / - keys can be used to link the desired video input of the cross bar to the Web server.
The maximum number of selectable inputs is 99
Two-digit position number
3
To input two-digit position numbers, click the ./.. button first.
Save position
4
The current pan/tilt position is stored under the selected position number (point 6). Up to 64
positions can be stored for the SIEMENS PTZ; the SIEMENS CCDA can store up to 55
positions.
Focus adjustment
5
The focus can be set here. The "∞" button sets the focus for distant objects; the "ο" button is
for focusing on objects that are close.
Pan/tilt control
6
The arrow keys are used to control the pan/tilt head. To do this, the video input (Live Player
button #5) to which the IP camera is connected must be linked.
Please note the following for using SIEMENS CCDA:
SIEMENS CCDA does not support the diagonal control buttons.
Zoom
7
The +/- buttons can be used to control zoom lenses.
Clear entry
8
Numeric keypad
9
Keypad for entering position numbers
Unit description
21
04.2006