Configuring Image Parameters; Configuring General Image Parameters; Configuring Text Overlay - Siemens CCIS1337-LP Configuration Manual

10.4

Configuring image parameters

10.4.1 Configuring general image parameters

10.4.2 Configuring text overlay

Siemens Building Technologies
Fire Safety & Security Products
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
Select Image parameters in the Configuration menu.
2.
The Image parameters dialog will appear:
Enter the desired settings in this dialog.
3.
Live video image brightness (0% to 100%)
Brightness
Live video image contrast (0% to 100%)
Contrast
Live video image saturation (0% to 100%)
Saturation
Activate the check box to rotate the image through 180 degrees (the image now
Flip picture
appears upside down).
Click Save.
4.
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
Select Image parameters in the Configuration menu.
2.
The Image parameters dialog appears:
Enter the desired settings in this dialog.
3.
Configuration
33
04.2006