Accessing The Unit's Home Page; Accessing The Unit's Home Page With Microsoft Internet Explorer; Accessing The Unit's Home Page With The Web-Cam Ip Manager - Siemens CCIS1337-LP Configuration Manual

Unit description
7.4

Accessing the unit's home page

7.4.1

Accessing the unit's home page with Microsoft Internet Explorer

7.4.2

Accessing the unit's home page with the Web-Cam IP Manager

18
Siemens Building Technologies
Fire Safety & Security Products
There are two ways of accessing the unit's home page:
Using Internet Explorer
Using the Web-Cam IP Manager
Type the IP address that is allocated to the device in the HTTP address field
1.
of Internet Explorer. See Section 10.3 Changing the device IP address.
For example: http://192.168.100.100/
Confirm with the Enter key.
2.
The unit's home page will be displayed.
This assumes that:
The Web-Cam IP Manager and all the units are located in the same network
segment. If a device and the Web-Cam IP Manager are not located in the same
network segment, you must ensure that associated gateway (router) passes the
SSDP multicast messages sent by the Web-Cam IP Manager to the network
segment where the device is located.
SSDP (Simple Service Discovery Protocol / network protocol)
–
Start the Web-Cam IP Manager by loading IP Manager.exe. This application
1.
is found on the CD included with delivery.
The Web-Cam IP Manager program window will open:
04.2006