Setting The Date And Time; Configuring User Names And Passwords - Siemens CCIS1337-LP Configuration Manual

Configuration
10.6

Setting the date and time

10.7

Configuring user names and passwords

44
Siemens Building Technologies
Fire Safety & Security Products
Alarm function
Alarm text
Click Save.
4.
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
Select Date and Time in the Configuration menu.
2.
The Date and Time dialog will appear:
Fig. 14 Date and time
The time and date that were current when the device start page was loaded
appear in the relevant fields.
You can set the device's built-in real-time clock here.
Choose the desired settings from the dropdown list for each field.
3.
Click Save.
4.
You can define user names and passwords for device configuration and image
access (live image access rights).
The following options are available:
OFF
The "alarm in" function on the back side is deactivated.
ON
The "alarm in" function on the back side is activated.
After resetting the alarm, the alarm will continue to be displayed on the
IP camera for approximately 30 seconds.
This text is displayed in the event of an alarm and can be displayed on
an analog monitor in addition to display in a browser window.
Enter a text here, which is to appear on the live image in addition to
the ID text. See Section 10.5.5 Entering and positioning the ID text.
Text length
Max. 20 characters
Allowed characters
Use only the following characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZ
0123456789 : < > - . , ; * / SPACE
NOTE
Lower case letters are converted to upper case.
Any unpermitted characters are replaced by a period.
04.2006