Configuring Network Settings - Siemens CCIS1337-LP Configuration Manual

Configuration
10.2

Configuring network settings

28
Siemens Building Technologies
Fire Safety & Security Products
Open the unit's home page. See Section 7.4 Accessing the unit's home page.
1.
Select Network settings in the Configuration menu.
2.
Fig. 6 Network settings
Enter the desired settings in this dialog.
3.
Firmware Version
Host Name
Automatic network
configuration
IP Address
Subnet Mask
Gateway (Next Hop)
MAC Address
Link Speed
Click Save.
4.
Restart your IP camera.
5.
See Section 10.8 Restarting the camera.
Display of the firmware version
The host name entered here appears in the Web Cam IP Manager as the
name of the device. See Section 10.3 Changing the device IP address.
If you activate automatic network configuration, a DHCP or BOOTP
server will automatically allocate an IP address, a subnet mask and a
gateway to your device. See Section 10.3.1 Changing the device IP
address via the device home page.
Enter the unit's IP address in this field. See Section 10.3.1 Changing the
device IP address via the device home page.
Enter the subnet mask for the unit in this field. See
Section 10.3.1 Changing the device IP address via the device home
page.
Enter the gateway IP address in this field. The gateway is the network
computer which establishes the connection between different network
segments. If the device is only to be accessed by other devices in the
same network segment, enter 0.0.0.0 here.
Displays the network card ID.
Choose the speed from the dropdown list. The preferred setting is
"autosensing".
04.2006