Table of Contents
Advertisement
Configuration
7.3
Image parameters
7.3.1
Camera - Basic setting
28
Siemens Building Technologies
Fire Safety & Security Products
NOTE
The Day/Night function is supported by the CCMS1315 network camera only.
Day/Night
Day-Night Delay time
Day-Night leve
Basic items such as the size and quality of delivered images of the camera can be
set here.
Select Image Parameters in the Configuration menu.
1.
A sub menu for Camera Settings will appear.
Click "Basic" in the sub menu.
2.
The "Camera - Basic Settings" screen will appear.
Configure the individual settings.
3.
Click the Save button to save your settings.
4.
The settings will not be reflected unless the Save button is clicked.
Configure auto black-and-white function. Auto B/W is the function to
gain sensitivity by turning to B/W automatically at dark environment.
ON: Auto B/W takes action.
OFF: Auto B/W does not take action.
NOTE:
The focus of the image may appear a little blurred in B/W mode when
an infrared illuminator is activated at night.
5 delay settings – 0, 5, 10, 15, 30 s – are available for selection to
avoid error induced by instantaneous lighting change. This allows the
delay time for the day/night function to be set.
3 level settings – high/mid/low – are available for selection. The
switching point from colour to black/white mode depends on the
ambient light conditions.
01.2009
Advertisement
Table of Contents
