Loading Printing Paper - Sharp UX-A1000 Service Manual

4. Loading printing paper

You can load letter or legal size paper in the paper tray. Recommended paper
weight is 20-lb. Copy Bond. The maximum number of sheets is as follows:
Letter size: Approx. 200 sheets (20-Ib. copier paper at room temperature;
maximum stack height should not exceed line on tray)
Legal size: Approx. 100 sheets (20-Ib. copier paper at room temperature)
1
Pull the paper plate toward you, and
remove the paper tray cover from the
paper tray.
2
If you are going to load legal paper, flip
up the paper tray extension.
3
Pull the paper plate toward you and insert the stack of paper into the
tray, PRINT SIDE UP .
•
If paper remains in the tray, take it out and combine it into a single stack
with the new paper.
Be sure to load the paper so that
printing takes place on the print side
of the paper. Printing on the reverse
side may result in poor print quality.
4
Pull the paper plate toward you and
replace the paper tray cover.
The stack
should not
be higher
than this line
Place the
LETTER
cover using the
LEGAL
appropriate
notch for the
size of paper
loaded
1
Setting the paper size
The fax has been set at the factory to scale received faxes to letter size paper.
If you loaded legal paper, you must change the paper size setting to LEGAL.
1
Press FUNCTION once and
2
Press once and
3
Press once.
4
Select the paper size:
LETTER: LEGAL:
1
5
Press to return to the date and time display.
STOP
2
Contrast settings
AUTO
DARK
1
Load the document(s).
•
The document must be loaded before
the resolution and contrast can be
adjusted.
2
Press one or more times
RESOLUTION/
RECEPTION MODE
until the desired resolution and
contrast settings appear in the display.
•
The first time you move through the list
of resolution settings, the contrast
setting AUTO will appear next to each
resolution setting. The second time you
move through the list, the contrast
setting DARK will appear.
Note: In order to transmit in SUPER FINE resolution, the receiving fax machine
must also have that resolution. If it doesn't, your machine will automatically step
down to the next best available setting.
1 – 7
UX-A1000U
Display:
twice.
PRINT SET-UP
PAPER SIZE SET
once.
1=LETTER,2=LEGAL
The display briefly shows
your selection, then:
COPY CUT-OFF
2
Use AUTO for normal documents.
Use DARK for faint documents.
Display:
STANDARD :AUTO
FINE :AUTO
SUPER FINE :AUTO
HALF TONE :AUTO
STANDARD :DARK
FINE :DARK
SUPER FINE :DARK
HALF TONE :DARK