Table of Contents
Advertisement
UX-A1000U
5. Clearing a jammed document
If the original document doesn't feed properly during transmission or copying,
or DOCUMENT JAMMED appears in the display, first try pressing
the document doesn't feed out, remove it as explained below.
Important:
Do not try to remove a jammed document without releasing it as explained
below. This may damage the feeder mechanism.
1
Slowly open the operation panel until it
is half open.
2
Flip up the green levers on each side of
the white roller.
3
Gently remove the document.
•
Be careful not to tear the document.
4
Flip down the green levers on each
side of the white roller.
5
Close the operation panel, pressing
down on both sides to make sure it
clicks into place.
6. Clearing jammed printing paper
1
Open the operation panel.
START/
MEMORY
. If
2
Open the print compartment cover.
•
Press as shown and pull the cover
toward you.
3
Gently pull the jammed paper out of the
machine, making sure no torn pieces
of paper remain in the print
compartment or rollers.
4
Close the print compartment cover.
5
Close the operation panel, pressing
down firmly on both front corners to
make sure it clicks into place.
1 – 8
Advertisement
Table of Contents
