Toshiba e-studio50f Operator's Manual page 36

Customizing Your Machine
Fax Parameter Table
No. Parameter
19 OGM LENGTH
20 SILENT DETECTION
22 SUBSTITUTE RCV
23 RECORDING PAPER
24 PRINT REDUCTION
25 REDUCTION RATIO
26 POLLING PASSWORD
28 STAMP AT MEM. XMT
30 DRD SERVICE
32 COPY REDUCTION
36
Setting
Number
1
(TAM I/F)
---
60
1
(TAM I/F)
2
1
2
1
SIZE
2
3
1
2
70
----
100
1
2
1
2
1
2
Setting
1 sec. Setting for the OGM length of your TAM from 1 to 60
seconds. The machine will not start to detect SILENCE until
---
the time setting has lapsed.
60 sec.
(Default = 20 sec.)
Invalid Selecting the Silent Detection Mode.
Valid
Invalid Selecting whether the machine receives to memory when
the recording paper runs out, toner runs out or the
Valid
recording paper is jammed.
A4 Setting the recording paper size installed in your machine.
Letter
Legal
Fixed Selecting print reduction mode.
Fixed: Reduce received document according to setting of
Auto
Parameter No. 25.
Auto : Reduce received document according to the length
of received documents.
70% Selecting the fixed print reduction ratio from 70% to 100%.
This parameter functions only when the fixed print reduction
----
is selected on Fax Parameter No. 24.
100%
(----) Setting a 4-digit password for secured polling. (See page
70)
Polling password can only be operated between e-
STUDIO50Fs.
Invalid Selecting whether the machine stamps the original
documents when storing the documents into memory.
Valid
(depending on the Stamp setting on the Control Panel)
Invalid Selecting whether or not the machine is available "DRD
Service". If this parameter is set to "Valid", your machine
Valid
detects the specified ring pattern only to receive a
document automatically.
Manual Selecting whether the machine performs the copy reduction
ratio automatically or manually.
Auto
Manual: The machine will prompt you for the Zoom ratio
(100% to 70%) when making copies.
Auto : The machine will automatically determine the
reduction ratio according to the length of the
original document.
Comments