Using Fan Without Light Kit (Optional) - Harbor Breeze 317058 User Manual

FINAL INSTALLATION
9.
The pull chain extensions (J) supplied in one of
the hardware packs or custom pull chain
extensions (not included) may be attached to fan
and light pull chains. (Fig. 9)

USING FAN WITHOUT LIGHT KIT (OPTIONAL)

1.
If you do NOT wish to use the light kit, remove
three switch housing plate screws (R). (Fig. 1)
2. Align holes in extra switch housing (C) with
holes in switch housing plate. (Note: The wide
gap in the top edge of the extra switch housing
(C) should align with the reverse switch on the
switch housing plate for the proper fit.) Re-insert
switch housing plate screws (R) that were just
removed. Use a Phillips screwdriver to secure all
switch housing plate screws (R). (Fig. 2)
9
(For Fan)
1
Switch
Housing
Plate
R
2
Switch
Housing
Plate
R
14
J
(For Light)
C