Advertisement

Harbor Breeze® is a registered trademark
of LF, LLC. All Rights Reserved.
ATTACH YOUR RECEIPT HERE
Purchase Date _________________________
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also
contact us at partsplus@lowes.com or visit www.lowespartsplus.com.
SM20655
BOLTZ CEILING FAN
1
ITEM #3025021
MODEL #42300
Español p. 21

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BOLTZ 42300 and is the answer not in the manual?

Questions and answers

Summary of Contents for Harbor Breeze BOLTZ 42300

  • Page 1 ITEM #3025021 BOLTZ CEILING FAN MODEL #42300 Harbor Breeze® is a registered trademark Español p. 21 of LF, LLC. All Rights Reserved. ATTACH YOUR RECEIPT HERE Purchase Date _________________________ Questions, problems, missing parts? Before returning to your retailer, call our customer service department at 1-888-251-1003, 8 a.m.
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Package Contents ..............3 Hardware Contents .
  • Page 3: Package Contents

    PACKAGE CONTENTS PART DESCRIPTION QUANTITY Downrod Downrod Pin (preassembled to Downrod [A]) Downrod Clip (preassembled to Downrod [A]) Mounting Bracket (preassembled to Canopy [E]) Canopy Canopy Cover (preassembled to Canopy [E]) Mounting Bracket Screw (preassembled to Mounting Bracket [D]) Set Screw (preassembled to Motor Assembly [I]) Motor Assembly Fitter Plate (preassembled to Motor Assembly [I]) Fitter Plate Screw (preassembled to Fitter Plate [J])
  • Page 4: Hardware Contents

    HARDWARE CONTENTS (shown actual size) Wire Connector Blade Screw Blade Washer Qty. 3 Qty. 12 Qty. 12 + 1 extra + 1 extra + 1 extra...
  • Page 5: Safety Information

    SAFETY INFORMATION Please read and understand this entire manual before attempting to assemble, operate or install the product. • Before you begin installing the fan, disconnect the power by removing fuses or turning off the circuit breakers. • Make sure all electrical connections comply with local codes, ordinances, the National Electrical Code and ANSI/NFPA 70-199.
  • Page 6: Preparation

    SAFETY INFORMATION CAUTION: Read all instructions and safety information before installing your new fan. Review the accompanying assembly diagrams. CAUTION: Be sure the outlet box is properly grounded or that a ground (green or bare) wire is present. CAUTION: Carefully check all screws, bolts and nuts on the fan motor assembly to ensure they are secured.
  • Page 7: Initial Installation

    INITIAL INSTALLATION 1. Turn off the circuit breakers and the wall switch to the fan supply line leads. DANGER: Failure to disconnect the power supply prior to installation may result in serious injury or death. 2. Determine the mounting method to use. Standard Mounting is best suited for ceilings 8 ft.
  • Page 8 INITIAL INSTALLATION 4. Loosen all four preassembled mounting bracket screws (G), then completely remove the two mounting bracket screws (G) from the round holes of canopy (E). Set aside for later use. Turn the canopy in a counterclockwise direction. Detach mounting bracket (D) from canopy (E).
  • Page 9 INITIAL INSTALLATION 7. Insert the downrod (A) through the canopy (E) and yoke cover (L). Feed the wires from the motor assembly (I) through the downrod (A). 8. Slide the downrod (A) into the yoke of the motor assembly (I), align the holes, then re-install the downrod pin (B) and downrod clip (C).
  • Page 10 INITIAL INSTALLATION 10. If you decided to cut back the lead wire in Step 9, strip 1/2 in. of insulation from the end of the white wire. Twist the stripped ends of each strand of wire within the insulation with pliers (not included). Repeat this step for the black wire.
  • Page 11: Wiring

    WIRING WARNING: To reduce the risk of fire, electrical shock or personal injury, wire connectors provided with this fan are designed to accept only one 12-gauge house wire and two lead wires from the fan. If your house wire is larger than 12-gauge and there is more than one house wire to connect to the two fan lead wires, consult an electrician for the proper size wire connectors to use.
  • Page 12: Final Installation

    FINAL INSTALLATION 1. Align the canopy (E) over the loosened mounting bracket screws (G) preassembled on mounting Keyhole bracket (D). Place the keyhole slot of the canopy (E) Slot onto the mounting bracket screws (G) and rotate the canopy (E) clockwise. Secure the canopy (E) with the mounting bracket screws (G) previously removed (Step 4, page 8).
  • Page 13 FINAL INSTALLATION 4. Remove one and loosen the other two light pan screws (N) from the underside of the light pan (M). Connect the 6-pin connector from the fan to the 6-pin connector from the light kit (O). Align the key slot in the light kit (O) with the loosened screws in the light pan (M).
  • Page 14 FINAL INSTALLATION 7. If desired, the mounting bracket in remote pack (R) can be installed to a wall using the provided mounting Mounting Bracket screws. The remote from remote pack (R) can be stored in the mounting bracket for easy access. Mounting Screw Mounting...
  • Page 15: Operating Instructions

    OPERATING INSTRUCTIONS 1. Remove the battery cover from the back of the remote Remote found in remote pack (R). Insert the battery from remote pack (R) into the remote; ensuring the polarity of the LED Indicator battery matches the polarity indicated in the battery compartment -- positive (+) to positive (+) and negative (-) to negative (-).
  • Page 16 OPERATING INSTRUCTIONS 3. Using a ceiling fan will allow you to raise your thermostat setting in summer and lower your thermostat setting in winter without feeling a difference in your Reverse comfort. Switch In warmer weather, push the reverse switch left to display a sun icon, which will result in downward airflow creating a wind chill effect (Fig.
  • Page 17: Care And Maintenance

    CARE AND MAINTENANCE At least twice each year, lower the canopy to check the downrod assembly, and then tighten all screws on the fan. Clean the motor housing with only a soft brush or lint-free cloth to avoid scratching the finish. Clean the blades with a lint-free cloth. Total fixture wattage is 16 watts;...
  • Page 18 TROUBLESHOOTING PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION 1. The blades and/or blade 1. Check and tighten all screws that hold arms are loose. the fan blades to the blade arms and the blade arms to the motor. 2. The blades are unbalanced. 2.
  • Page 19: Limited Lifetime Warranty

    LIMITED LIFETIME WARRANTY The manufacturer warrants this fan to be free from defects in workmanship and materials present at time of shipment from the factory for a lifetime from the date of purchase by the original purchaser. The retailer also warrants that all other fan parts, excluding any glass or plastic blades, to be free from defects in workmanship and material at the time of shipment from the factory for a period of one year after the date of purchase by the original purchaser.
  • Page 20: Replacement Parts List

    REPLACEMENT PARTS LIST For replacement parts, call the customer service department at 1-888-251-1003, 8 a.m. - 8 p.m., EST, Monday - Sunday. You could also contact us at partsplus@lowes.com or visit www.lowespartsplus.com. PART DESCRIPTION PART # Downrod 4L000006400 Mounting Bracket 4L000006410 Canopy 4L000007150...

This manual is also suitable for:

3025021

Table of Contents

Save PDF