Chapter 5
3. Note that the Experiment Settings stack on the left now displays several
4. Open the Common Acquisition Settings expander and set the Exposure Time
5. The Status bar (at the bottom of the window) displays an icon for temperature
Confirming the Setup
1. Click on the View tab, just above Experiment Devices, to change to the display area.
Figure 13. Experiment Devices Area
expanders. Because this is a new experiment, the default settings for the camera
will be active.
to 100 ms.
status. Temperature status reports the current temperature and whether the set
temperature has been reached. Clicking on the icon opens the Sensor expander
where the set temperature can be changed.
Operation
Figure 14. View Area
35
35