Checking The Equipment And Parts Inventory; System Requirements - Princeton PIXIS-XB System User Manual

20

Checking the Equipment and Parts Inventory

Confirm that you have all of the equipment and parts required to set up the PIXIS-XB
system. A complete system consists of:
Standard System:






Options:




System Requirements

Environmental Requirements
Storage temperature: 55°C
Operating environment temperature: 5ºC to +30ºC; the environment temperature
Relative humidity 50%; non-condensing
Note: The cooling performance may degrade if the room temperature is above
+23°C.
Ventilation:
air vents. Where the camera is inside an enclosure, > 30 cfm air circulation and heat
dissipation of 100 W is required.
Power:
power supply which in turn plugs into an AC power source.
Host Computer
Note: Computers and operating systems all undergo frequent revision. The following
information is only intended to give minimum computer requirements. Please contact the
factory to determine your specific needs.
PIXIS-XB System Manual
Camera and Power Supply
CoolCUBE Circulator and hoses (for liquid-cooled system)
II
Host Computer: Can be purchased from Princeton Instruments or provided by
user. For enhanced performance, a fast hard drive (10,000 rpm) and 2GB RAM is
recommended.
Operating System:

WinView/32 or WinSpec/32: Windows XP (32-bit, SP3 or later) or Vista
(32-bit required).

LightField: Windows Vista (64-bit) or Windows 7 (64-bit)
USB cable: Five (5) meter cable (6050-0494) is standard.
PIXIS-XB System User Manual
Application Software:

WinView/32 or WinSpec32 (Ver. 2.5.25 or later) CD-ROM (optional)

LightField CD-ROM (optional)
Software User Manual (provided with application software)
Fiber Optic Extender Kit
range over which system specifications can be guaranteed is +18ºC to +23ºC
For the PIXIS-XB camera, allow at least one inch clearance for the side
The PIXIS-XB camera receives its power from the supplied self-switching DC
Version 2